English (Change)

POOL LADDER(FOR 52"POOL)
POOL LADDER(FOR 52"POOL)

POOL LADDER(FOR 52"POOL)

SKU# 58975

POOL LADDER(FOR 52"POOL)
 
Feature
    Specs
    Item # 58975
    Size N/A
    Age Grading adult
    Package Dimension 36.25 in x 18.5 in x 6.375 in
    Package Weight 25.86 lbs
    Product Size
    In The Box
    Manuals & Video

    Manual
    52 .. pdf

    Video
    Replacement Parts
    No.PartSpare Part #Compose Qty
    2-SECTION POOL LADDER (FOR USE WITH 52" (132CM) WALL HEIGHT POOLS)
    1U-SHAPED TOP RAIL108152
    2TOP PLATFORM WITH WARNING LABEL FOR 52" BLUE TWO-SECTION LADDER111451
    3SHORT FASTENER FOR TOP RAIL108105
    4LONG FASTENER FOR TOP BRACE102275
    5STEP MOUNTING PIN1034934
    6STEP103488
    7UPPER SIDE LEG FOR 52" TWO-SECTION LADDER10822A2
    8UPPER SIDE LEG FOR 52" TWO-SECTION LADDER10822B2
    9LOWER J-SHAPED SIDE LEG (A) FOR 52" TWO-SECTION LADDER11006A2
    10LOWER J-SHAPED SIDE LEG (B) FOR 52" TWO-SECTION LADDER11006B2
    52" TWO-SECTION LADDER189751
    Faq
    » Empty the pool, use a soft brush, mild detergent and water to remove algae stains from the pool liner. Thoroughly rinse and dry before refilling or storage.
    » Water condition varies from country to country, states, region, and within specific zones and areas. In some regions the water could be "hard water", this is because the water contains excessive minerals, such as calcium and magnesium, thus causing the water to adopt a milky color. Check your local pool supply store for advice on water treatment and balance.
    » Your pool can be easily emptied and stored in a safe place during the winter. However, many people choose to leave their pool up year round. In areas where freezing temperatures occur, there is risk of ice damage. It is recommended to drain, disassemble and store the pool in a safe place when temperatures drop below 32 degrees Fahrenheit. See "How To Drain Your Pool" section. Clean pool water thoroughly (If Easy Set Pool make sure the top ring is properly inflated). Remove the skimmer (if applicable) or any accessories attached to the threaded strainer connector. Replace strainer grid if necessary. Be sure all accessories parts are clean and completely dry before storage. Plug the Inlet and Outlet fitting from the inside of the pool with the plug provided (sizes 10' and 12'). Close the Inlet and Outlet Plunger Valve (15', 18', and 24'). Remove the ladder (if applicable) and store in a safe place. Be sure the ladder is completely dry before storage. Remove the hoses that connect the pump and filter to the pool. Add appropriate winter chemicals. Consult your local pool dealer as different regions vary greatly. Cover pool with Intex Pool Cover. IMPORTANT: INTEX POOL COVER IS NOT A SAFETY COVER. Clean and drain pump, filter housing and hoses. Remove and discard old filter cartridge (keep a spare cartridge available for next season). Bring pump and filter parts indoors and store in a safe and dry area, preferably heated. STORING POOL FOR WINTER After draining pool, dry pool liner completely (100%). Sprinkle talcum powder on liner to prevent vinyl from sticking together and to absorb any water you may have missed. Roll pool liner to avoid creases and relocate to storage area. Place it in original carton if you saved it. Keep all small parts together with filter pump, manual, and pool, and then place in an area that will remain at room temperature throughout the storage season.
    » Yes, check with your local pool supply stores. However, the 30” (#58909), 36” (#58972), 42” (#58973, #58969) 48” (#58974) and 52” (#58975, #58971) were designed specifically for INTEX above ground pools.
    » Excessive use of pool chemicals can cause the color of the inside wall printing to fade away faster, like a heavy chlorinated public swimming will cause a bathing suit color to fade
    » Yes, in some cases certain types of hardy grass such as Bermuda or St. Augustine can grow through the liner. Before setting up your pool, it is recommended that you clear the area of these types of hardy grasses. INTEX will not be held responsible for grasses that may grow through the ground cloth and / or pool liner, as this is not a manufacturing defect. A ground cloth or tarp may be helpful in preventing this from occurring.
    » The 30" ladder should be used for the 30" height Frame Pool. The 36" ladder should be used for the 36" height Frame Pool. The 42" ladder should be used for the 42" height Frame Pool. The 48" ladder should be used for the 48" height Frame Pool. The 52" ladder should be used for the 52" height Frame Pool, 49" and 53" Sequoia Spirit Frame Pool.
    » It depends on what pool package is purchased. Please check with the store where you buy your pool, or you may contact an INTEX service station shown on your Owner’s Manual. It depends on what pool package is purchased. If the package you've purchased does not include a ladder, this item can be purchased on-line at www.intexcorp.com and clicking "INTEX Replacement Parts and Accessories", or you can call INTEX Consumer Service at (800) 234-6839 to locate a retailer near you. (US/Canada)
    » A PVC or silicon based glue for repairing camping mats, tents, shoes, inflatable boats, etc are suitable for INTEX pools.
    » Processing time is approximately 3 business days from the date we receive the product. It is then shipped by Fed EX Ground from Long Beach CA. Therefore, transit time will be determined by your location. (for U.S & Canada only)
    » Check that your ladder is located on a level and firm solid base. Do not place the ladder on a soft surface such as sand or soft muddy dirt. Before climbing the ladder, pull outwards on the legs to fully expand the ladder which should make the ladder feel tighter. See attached picture:
    » If your e-mail address was provided at the time the order was placed, and your order was shipped by Fed EX, you will receive an e-mail confirmation with the tracking number. You can then go to the Fed EX website to track the package.
    » No. Under no circumstances should anyone jump or dive into the pool. INTEX does not distribute any pools that are deep enough to allow such activity. Serious injury, paralysis or death could result from failure to follow these rules.
    » The 36" ladder should be used for the 30" and 36" height Easy Set Pools. The 42" ladder should be used for the 42" height Easy Set Pool. The 48" ladder should be used for the 48" height Easy Set Pool. The 52" ladder should be used for the 52" height Easy Set Pool
    » Orders are shipped within 2-3 business days once the order is placed. Orders will be shipped by regular mail or Fed EX (depending on the size of the order). Therefore, transit time will be determined based on your location and shipping method.
    » Yes. Intex will accept replacement part orders, accessory orders, and warranty questions from Canadian consumers. For replacements on items other than Above Ground Pools and specific airbeds, please refer back to the original place of purchase. To order replacement parts please call 800-234-6839 or go to www.intexcorp.com.
    » All INTEX ladder 30", 36", 42", 48" and 52" are rated for users up to 300 pounds (136kg) in weight.
    » No. Our system does not accept COD (Cash on delivery) or check. We only accept Visa, Mastercard, American Express and Discover credit cards. Pre-paid credit cards can be used if they are from one of these four companies.(for U.S & Canada only)
    » No.